You install, we build the panel
Send your specification or ETS list. You get the panel wired, marked and measured, ready for you to mount and connect. Assembly at €40/h by our norms; hours and total are in the quote before you order.
PanelCraft/Design/Panel assembly
Panel assembly · Riga workshop · EU delivery by agreement
Send the specification, the ETS device list or just a floor plan. We reply within one working day. Before you order you get a 3D view of your panel from PanelCraft Builder and a quote. We assemble it in Riga, measure it and hand it over with the documents.
Input on top · isolator, SPD, contactor
Terminals · every wire marked
Who it is for
Same workshop, same checks. The difference is who sends the drawings and how the price is shown.
Send your specification or ETS list. You get the panel wired, marked and measured, ready for you to mount and connect. Assembly at €40/h by our norms; hours and total are in the quote before you order.
Send the plan or what your electrician gave you. You get a 3D view and one quote for parts and assembly. A qualified electrician connects the panel on site.
What to send
PDF, DWG, XLSX, a photo of a hand sketch — we take what you have and tell you what is missing.
Devices with articles and quantities, or the BOM from your designer.
KNX actuators, power supplies, interfaces. We place them on the rails with the power side.
Supply, protection, RCD groups and final circuits. We draw the panel layout from it.
Rooms and loads only? We design the panel first: panel design from €290, credited when we assemble it.
Before you order
We draw your panel in PanelCraft Builder. Before you order you see the 3D view and get a quote that lists every device by brand and article.

The 3D view and the quote are free; you decide after you see them.
How we build and check
The panel is built from the drawing, not from memory: every device, wire and terminal has a designation in Builder before anyone picks up a crimper.
Your panel goes through the Builder rule check: protection against cable, RCD coverage, spare space, terminal load.
Parts are ordered by article from the BOM in the quote. Replacements only with your approval.
Enclosure, rails, devices, combs, N and PE bars, wiring with ferrules on both ends, device, wire and terminal markers.
Insulation resistance, PE continuity, RCD tripping and phase sequence. The values are written into the protocol.
The panel with its documents. Collection in Riga, or delivery within the EU by agreement.


In the kit
The electrician who connects the panel and the next one who opens it see the same thing.
Single-line diagram and mounting diagram of the panel as built.
Every device with brand, article and designation.
Device plates, wire tags and terminal markers that match the diagram.
Insulation resistance, PE continuity, RCD tripping, phase sequence — with values.
The finished panel: rows, wiring and terminals, before it leaves the workshop.
How we price
For electricians and integrators: assembly at €40/h (excl. VAT) by our assembly norms — hours and total are in the quote before you order.
Building owners: the 3D view and the quote are free; the assembly price is in the quote together with the parts. Lead time is stated in the quote.
FAQ
The panel is connected to the supply only by a qualified electrician on site. We build, measure and document it; we do not energise it at your property as part of this service.
Assembly at €40/h (excl. VAT) by our assembly norms — hours and total are in the quote before you order. The 3D view and the quote are free.
We state the lead time in the quote. It depends on the panel size and on when the parts arrive.
A specification, an ETS device list or a single-line diagram. A floor plan is enough too — then we design the panel first; the design fee is credited when we assemble it.
Insulation resistance, PE continuity, RCD tripping and phase sequence. The values go into the measurement protocol that ships with the panel.
Yes, within the EU by agreement. Packing and delivery are in the quote.
A qualified electrician on site. The diagram, the marking and the protocol in the kit tell them what goes where.
We reply within one working day
Attach the specification, ETS list, diagram or plan in the form. An engineer answers, not a sales bot.
Or e-mail: [email protected] · +371 2981 6769
The request form opens on the next page: pick what you need, attach the files and leave an e-mail or phone. About two minutes.
Request a quoteWe use your details only to answer this request. Privacy policy