Outdoor & Perimeter Lighting
KNX automation for exterior lighting — dusk-to-dawn photocell control, PIR motion-activated boost, security alarm floodlights, IP66 DALI driver selection, façade wash lighting, and energy-efficient nighttime scheduling.
Dusk-to-Dawn and PIR Outdoor Lighting with KNX: Photocell, Motion Boost and Timer Logic
Programming KNX outdoor lighting automation — Elsner P03-KNX-FLAT photocell twilight DPT and lux threshold, PIR motion sensor boost logic with base 10% to 100% on motion and 5-minute timer return, KNX weekly schedule for seasonal shift, DALI IP66 driver dimming commands, and energy saving quantification for exterior lighting.
DALI IP66 Outdoor Drivers: Tridonic, Helvar and Osram Selection for Weatherproof Luminaire Control
Selecting and wiring DALI drivers for outdoor luminaires — IP66 driver requirements, IK08 impact resistance, cold-start at -40°C, Tridonic basicDIM and Helvar iDim specifications, DALI bus distance limits for outdoor runs up to 300m, outdoor cable routing in buried conduit, and lightning protection for outdoor DALI bus with TVS diodes.
Security Alarm Floodlight Automation with KNX: Alarm GA to DALI Scene and CCTV Coordination
Integrating perimeter floodlights with KNX security systems — alarm GA triggering DALI scene full brightness, 15-minute hold timer before return to base, simultaneous CCTV PTZ preset command, ARISTO BewO email alert with zone name, KNX arming and disarming schedule, and fail-safe design with floodlights defaulting ON when KNX power is lost.
Need an outdoor lighting panel with KNX and DALI built to spec?
We design and manufacture low-voltage panels with IP66 DALI drivers, KNX photocell and PIR integration, and security floodlight automation — delivered tested and commissioned to your site.
Request a quote →